<< Home

 

Service Plan B >> Service Plan C >> Maintenance Pricing >>

 

Service Plan Tables:

 

Service Plan A

(Recommended Monthly)

Scanner Unit:

 

Item

Action

Completed

 1. Scanner Unit

 Clean.

P

 2. Screen

 Clean.

P

 3. Mouse

 Clean.

P

 4. Auto Film Carrier NC135Y

 Clean.

P

 w  Film Nip Rollers

 Clean with alcohol and ear buds. Inspect for wear and tear. Inspect dust removal roller.

P

 w  Film Mask

 Clean with alcohol and ear buds. Inspect.

P

 w  Diffusion Plate

 Wipe with slightly damp cloth. Inspect.

P 

 5. Auto Film Carrier NC240Y

 Clean.

P

 w  Rollers

 Clean with alcohol and ear buds. Inspect for wear and tear. Inspect dust removal roller.

P

 w  Film Mask

 Clean with alcohol and ear buds. Inspect.

P

 w  Diffusion Plate

 Wipe with slightly damp cloth. Inspect.

P

 w  Magnetic Heads

 Clean with alcohol and ear buds. Inspect.

P

 6. Mirror Box

 Wipe with slightly damp cloth. Inspect.

P

 7. Light Source Air Filter

 Wash. Inspect.

P

 8. Power Supply Air Filter

 Wash. Inspect.

P

 9. Air Compressor Filter

 Dust out. Inspect.

P

 

 Printer Unit:

 

Item

Action

Completed

 1. Printer Section Air Filter

 Wash. Inspect.

P 

 2. Power Supply Air Filter

 Wash. Inspect.

P 

 3. Processing Heater Cooling Filter

 Wash. Inspect.

P 

 4. Dryer Air Filter

 Wash. Inspect.

P 

 5. Distribution Unit

 Clean.

P 

 6. Suction Cups

 Clean. Inspect. Check flexibility and sieves.

P

 7. Slide Shafts

 Clean. Apply Silicone Spray.

P

 8. Paper Feed Rollers

 Wipe with damp cloth. Inspect.

P 

 9. Dryer Belt

 Wipe with damp cloth. Inspect for deterioration.

P

 10. Crossover Racks

 Remove. Wash. Inspect rollers, bushes and casing.

P

 11. Auto-Cleaning Nozzle Housings

 Remove from crossover. Wash. Inspect. Re-attach.

P 

 12. Auto-Cleaning Tubes

 Clean. Inspect.

P 

 13. Dryer Entrance Rack

 Remove. Wash. Inspect rollers and gears.

P 

 14. Circulation Filter Pods

 Remove filters.

P 

 15. Circulation Filters

 Replace or wash.

P 

 16. Processing Racks

 Pull PS racks. Rinse and racks. Inspect rollers, pimple rollers and guide covers.

P 

 17. Processing Tanks

Drain PS solution. Wash tanks. Rinse well. Fill with De-ionised water (8.5l). Add FRC rinse tablets.

P 

 18. Processing Rack and Crossovers

 Insert racks into processor. Attach crossovers.

P 

 19. Printing Functions

 Check

P 

 20. Control Strip

 Run control strip after processor heats up

P 

 

<< Home << Service Plan A Service Plan C >> < Back to Top >

 

Service Plan B

(Recommended Bi-annually)

Scanner Unit:

Item

Action

Completed

 1. Scanner Unit

 Clean.

P 

 2. Screen

 Clean. Inspect screen colour.

P 

 3. Mouse

 Clean. Inspect.

P  

 4. Auto Film Carrier NC135Y

 Clean.

P 

 w  Outside

 Wipe with damp cloth. Inspect for any damage.

P 

 w  Inside

 Wipe with damp cloth. Inspect for any damage.

P 

 w  Film Nip Rollers

 Clean with alcohol and ear buds. Inspect for wear and tear. Inspect dust removal roller.

P 

 w  Film Mask

 Clean with alcohol and ear buds. Inspect.

P 

 w  Diffusion Plate

 Wipe with slightly damp cloth. Inspect.

P 

 5. Auto Film Carrier NC240Y

 Clean

P 

 w  Outside

 Wipe with damp cloth. Inspect for any damage.

P 

 w  Inside

 Wipe with damp cloth. Inspect for any damage.

P 

 w  Rollers

 Clean with alcohol and ear buds. Inspect for wear and tear. Inspect dust removal roller.

P 

 w  Film Mask

 Clean with alcohol and ear buds. Inspect.

P 

 w  Diffusion Plate

 Wipe with slightly damp cloth. Inspect.

P 

 w  Magnetic Heads

 Clean with alcohol and ear buds. Inspect.

P 

 6. Mirror Box

 Wipe with slightly damp cloth. Inspect.

P 

 7. Light Source Air Filter

 Wash. Inspect.

P 

 8. Power Supply Air Filter

 Wash. Inspect.

P 

 9. Air Compressor Filter

 Dust out. Inspect.

P 

 10. Light Source Optical Filter

 Dust out. Inspect.

P 

 11. Reflector

 Dust out. Inspect.

P 

 

Printer Unit:

 

Item

Action

Completed

 1. Body Panels

 Remove and wash. Inspect.

P 

 2. Printer Unit

 Clean. Blow out dust. Check hoses/clamps for leaks.

P 

 3. Printer Section Air Filter

 Wash. Inspect.

P 

 4. Power Supply Air Filter

 Wash. Inspect.

P 

 5. Processing Heater Cooling Filter

 Wash. Inspect.

P 

 6. Dryer Air Filter

 Wash. Inspect.

P 

 7. Large Print Exit Belts/Rollers

 Clean. Inspect.

P 

 8. Print Exit Unit Belts

 Clean. Inspect.

P 

 9. Dryer Exit Unit Rollers/Guides

 Clean. Inspect.

P 

 10. Laser Unit Air Filter

 Inspect.

P 

 11. Exposure Section Filter

 Inspect. Do NOT clean.

P 

 12. Replenishment Cartridge Nozzles

 Clean. Inspect.

P 

 13.Cutters

 Dust Out. Inspect.

P 

 14. Sub Scanning Belt

 Clean with alcohol. Inspect.

P 

 15. Distribution Unit

 Clean.

P  

 16. Suction Cups

 Clean. Inspect. Check flexibility and sieves.

P 

 17. Slide Shafts

 Clean. Apply Silicone Spray.

P 

 18. Paper Feed Rollers

 Wipe with damp cloth. Inspect.

P 

 19. Dryer Rack

 Clean. Inspect

P 

 20. Dryer Belt

 Wipe with damp cloth. Inspect for deterioration.

P 

 21. Crossover Racks

 Remove. Wash. Inspect rollers, bushes and casing.

P 

 22. Auto-Cleaning Nozzle Housings

 Remove from crossover. Wash. Inspect. Re-attach.

P 

 23. Auto-Cleaning Tubes

 Clean. Inspect.

P 

 24. Dryer Entrance Rack

 Remove. Wash. Inspect rollers and gears.

P 

 25. Circulation Filter Pods

 Remove filters. Wash. Inspect.

P 

 26. Circulation Filters

 Replace or wash.

P 

 27. Processing Racks

 Pull racks. Avoid contamination. Remove guide covers. Wash covers and racks. Inspect rollers,

 pimple rollers and guide covers.

P 

 28. Processing Tanks

 Drain PS solution. Soak tanks with bleach (Jik), Wash. Rinse well. Fill with De-ionised water

 (8.5l). Add FRC rinse tablets.

P 

 29. Processing Rack and Crossovers

 Insert racks into processor. Attach crossovers.

P  

 30. Processor Drive Chain/Sprockets

 Grease. Inspect for wear.

P 

 31. Processing Rack Helical Gears

 Grease. Inspect for wear.

P 

 32. Dryer Entrance Rack Drive Gears

 Grease. Inspect for wear.

P 

 33. Dryer Drive Gears

 Grease. Inspect for wear.

P 

 34. Densitometer White Board

 Clean.

P 

 35. Body Panels

 Re-assemble body panels.

P 

 36. Pump Output

 Perform Pump Output check. Do repairs if necessary.

P 

 37.Laser Optical Temperature Setup

 Execute.

P 

 38. Printing Functions

 Check.

P 

 39. Control Strip

 Run control strip after processor heats up

P 

 

<< Home << Service Plan A << Service Plan B < Back to Top >

 

Service Plan C

(Recommended Bi-annually)

Scanner Unit:

 

Item

Action

Completed

 1. Scanner Unit

 Clean.

P

 2. Screen

 Clean. Inspect screen colour.

P

 3. Mouse

 Clean. Inspect.

P

 4. Auto Film Carrier NC135Y

 Clean.

P

 w  Outside

 Wipe with damp cloth. Inspect for any damage.

P

 w  Inside

 Wipe with damp cloth. Inspect for any damage.

P

 w  Film Nip Rollers

 Clean with alcohol and ear buds. Inspect for wear and tear. Inspect dust removal roller.

P

 w  Film Mask

 Clean with alcohol and ear buds. Inspect.

P 

 w  Diffusion Plate

 Wipe with slightly damp cloth. Inspect.

P

 w  Maintenance

 Remove covers.

P

 w  Reduction Clutch

 Clean and retention belts.

P 

 w  Sensors

 Remove and clean all sensors.

P 

 w  Plug In Connector

 Clean with alcohol.

P

 w  Variable Film Mask

 Clean

P 

 w  Nip Drive Belts

 Clean and retention belts.

P 

 w  Sensor Calibration

 Execute

P 

 5. Auto Film Carrier NC240Y

 Clean

P 

 w  Outside

 Wipe with damp cloth. Inspect for any damage.

P

 w  Inside

 Wipe with damp cloth. Inspect for any damage.

P

 w  Rollers

 Clean with alcohol and ear buds. Inspect for wear and tear. Inspect dust removal roller.

P 

 w  Film Mask

 Clean with alcohol and ear buds. Inspect.

P

 w  Diffusion Plate

 Wipe with slightly damp cloth. Inspect.

P

 w  Magnetic Heads

 Clean with alcohol and ear buds. Inspect.

P

 w  Maintenance

 Remove covers.

P

 w  Reduction Clutch

 Clean and retention belts.

P

 w  Sensors

 Remove and clean all sensors.

P

 w  Plug In Connector

 Clean with alcohol.

P

 w  Variable Film Mask

 Clean

P 

 w  Cartridge Door

 Clean.

P 

 w  Sensor Calibration

 Execute

P 

 6. Scanner Unit

 Remove back cover. Blow out dust. Inspect fans.

P 

 7. Circuit Boards

 Remove cover. Blow out dust.

P 

 8. Cooling Air Flow Sensor

 Remove. Clean.

P 

 9. CCD

 Remove. Clean. Blow out dust.

P

 10. ND Filter

 Clean.

P 

 11. Zoom Lens

 Clean.

P

 12. Zoom Lens Cover

 Remove. Clean.

P

 13. Mirror Box

 Wipe with slightly damp cloth. Inspect.

P 

 14. Light Source Air Filter

 Wash. Inspect.

P 

 15. Power Supply Air Filter

 Wash. Inspect.

P 

 16. Air Compressor Filter

 Dust out. Inspect.

P 

 17. Light Source Optical Filter

 Remove. Disassemble. Clean.

P 

 18. Reflector

 Remove. Disassemble. Clean.

P

 19. Lamp

 Replace if necessary.

P

 

Printer Unit:

 

Item

Action

Completed

 1. Body Panels

 Remove and wash. Inspect.

P

 2. Printer Unit

 Clean. Blow out dust. Check hoses/clamps for leaks.

P 

 3. Printer Section Air Filter

 Wash. Inspect.

P 

 4. Power Supply Air Filter

 Wash. Inspect.

P 

 5. Processing Heater Cooling Filter

 Wash. Inspect.

P 

 6. Dryer Air Filter

 Wash. Inspect.

P 

 7. Cutters.

 Remove. Clean. Inspect.

P 

 8. Solution Temp Sensors

 Re-calibrate.

P 

 9. Circuit Board Section

 Remove cover. Blow out dust. Inspect.

P 

 10. Large Print Exit Belts/Rollers

 Clean. Inspect.

P 

 11. Print Exit Unit Belts

 Clean. Inspect.

P 

 12. Dryer Exit Unit Rollers/Guides

 Clean. Inspect.

P

 13. Laser Unit Air Filter

 Inspect.

P

 14. Exposure Section Filter

 Inspect. Do NOT clean.

P 

 15. Replenishment Cartridge Nozzles

 Clean. Inspect.

P 

 16. Cutters

 Dust Out. Inspect.

P 

 17. Sub Scanning Belt

 Clean with alcohol. Inspect.

P 

 18. Distribution Unit

 Clean

P 

 19. Suction Cups

 Clean. Inspect. Check flexibility and sieves.

P 

 20. Slide Shafts

 Clean. Apply Silicone Spray.

P 

 21. Paper Feed Rollers

 Wipe with damp cloth. Inspect.

P 

 22. Dryer Rack

 Clean. Inspect.

P 

 23. Dryer Belt

 Wipe with damp cloth. Inspect for deterioration.

P

 24. Crossover Racks

 Remove. Wash. Inspect rollers, bushes and casing.

P 

 25. Auto-Cleaning Nozzle Housings

 Remove from crossover. Wash. Inspect. Re-attach.

P 

 26. Auto-Cleaning Tubes

 Clean. Inspect.

P 

 27. Dryer Entrance Rack

 Remove. Wash. Inspect rollers and gears.

P 

 28. Circulation Filter Pods

 Remove filters. Wash. Inspect.

P 

 29. Circulation Filters

 Replace or wash.

P 

 30. Processing Racks

 Pull racks. Avoid contamination. Remove guide covers. Wash covers and racks. Inspect

 rollers, pimple rollers and guide covers.

P 

 31. Lower Turn Rollers

 Remove. Inspect. Replace pimple rollers if necessary.

P

 32. Processing Tanks

 Drain P3 solution. Soak tanks with bleach (Jik), Wash. Rinse well. Fill with De-ionised water

  (8.5l). Add FRC rinse tablets.

P

 33. Processing Rack and Crossovers

 Insert racks into processor. Attach crossovers.

P

 34. Processor Drive Chain/Sprockets

 Grease. Inspect for wear.

P

 35. Processing Rack Helical Gears

 Grease. Inspect for wear.

P

 36. Dryer Entrance Rack Drive Gears

 Grease. Inspect for wear.

P

 37. Dryer Drive Gears

 Grease. Inspect for wear.

P

 38. Paper Magazine Table Slider

 Lubricate.

P

 39. Densitometer White Board

 Clean.

P 

 40. Body Panels

 Re-assemble body panels.

P

 41. Pump Output

 Perform Pump Output check. Do repairs if necessary.

P

 42. Laser Optical Temperature Setup

 Execute.

P 

 43. Printing Functions

 Check.

P 

 44. Printing Function Inspection

 Execute. Menu 453 “Test pattern printing”

P

 45. Control Strip

 Run control strip after processor heats up.

P 

 

<< Home << Service Plan A << Service Plan B << Service Plan C < Back to Top >